PRO Wireless Telemetry for Jets, UAVs and Commercial Vehicles
NO MORE GUESSING ABOUT PERFORMANCE!
Our Pro line of data acquisition systems offer all the
advanced features of our standard Seagull and Flight Data
Recorder products, with additional features and capabilities
demanded in the UAV and professional scale markets.
Our feature rich, easy to use Pro telemetry and logging
systems are the only complete solutions for setting up,
monitoring and demonstrating professional unmanned platforms.
We have ended the guesswork about vehicle performance,
and specs can be proven rather than just assumed. And
best of all, no PhD in computer science is required!
All hardware and software is included to monitor airspeed,
altitude, RPM, one temperature, 4 servo channel movements
and glitches, and receiver battery voltage. All parameters are available on the Wireless Dashboard, including programmable beep alarms for altitude, airspeed, temperature, RPM, etc.
And now you can add our micro GPS expander module (below)
to the system, which gives you in-flight and recorded
position, course, ground speed, GPS altitude, distance
to pilot, UTC, and more, in addition to all the other
Seagull features. Software to graph your position live, and chart out your flight in
3D is also included.
NEW: now you can connect the Seagull to the data port of your Spektrum JR "Flight Log" capable RX to display and set alarms on live RF Link performance data! Purchase the cable below.
NEW - Multiple Engine/Multiple Sensor Support! Whether you fly electric, gas or nitro, our fully expandable systems make it easy to completely instrument multi-engine planes, or to add lots of channels of Temperature, Voltage, Current, A/D, etc. Click here for more information! NEW - Google Earth (TM) Real time and Recorded GPS support! Unleash the power of our Pro systems with the powerful visualization capabilities of Google Earth! Our software now supports live data feed to Google Earth, as well as exporting of recorded data to the Google Earth format!
We can provide customization of our Pro systems,
if the feature or sensor you need is not part of our standard
feature set.
We offer two key Pro Data Acquisition products:
Our Seagull Pro Wirelesss Dashboard system
provides up to 20 parameters of data from your platform
in real time, conveniently displayed either on the scrollable
pages of our LCD Data Dashboard, or full screen on your laptop (see full feature list in the righthand column). And, audible beeps can
be easily programmed for high or low alarm values on the
data, letting you set alarms for critical system parameters,
like high altitude, low battery, high temp, stall speed,
high RPM, and so much more.
Note that the Dashboard system also includes the Flight
Data Recorder Pro for in-flight logging. Our USB Flight Data Recorder Prosystem is perfect
for professionals who only need to see their data after
the flight, but not in real time (see full feature list in the righthand column). The tiny onboard unit
records up to 16 channels of data from your platform,
and comes withWindows software for flight download, playback
and graphing.
PRO-ONLY FEATURES (the following features are not found on our standard systems):
. High resolution airspeed measurement.
. High resolution altitude measurement (1' resolution)
. 16x the record time of our original Flight Data Recorder
. Wireless Dashboard has built-in varying tone variometer
. Support for up to 4 RPM inputs
. Up to 40 Hz sample rate
. Jet ECU Real-Time Monitoring (with optional ECU cable)
. Variable Beep Stall Speed Alert Feature
. Customization available
NEW- Jet Support: Want real-time alerts about turbine flameouts, low battery, etc.? Our Pro systems now support real-time data from most Jet ECUs. Click here for more information. Order the ECU Cable for your jet in the accessories section below.
Read through the specifications , read the review of the Pro system
on the Reviews page, and compare our products to any other
telemetry or recording system on the market. We offer
the best specs, most features, the friendliest user experience, and the
lowest cost, by far!
To order see your dealer, or purchase direct with
the buttons below:
Seagull Pro Wireless Dashboard Flight System, 900 MHz, 200 mW (US FCC Approved, up to 1.2 Miles Range with included Wire Antennas) includes Pro Recorder below. (SEA-PRO-900)
$499.99
Seagull Pro Wireless Dashboard Flight System, 2.4 GHz, 100mW (Worldwide Use, FCC/CE Approved, up to 3Km Range with included wire antennas) includes Pro Recorder below. (SEA-PRO-24-02)
$649.99
Seagull Pro Wireless Dashboard Flight System, 433 MHz, 10mW (European Version, CE Approved, up to 1000 meters range with included wire antennas). Includes Pro Recorder below. (SEA-PRO-433)
$599.99
OUR BEST! Seagull Pro Wireless Dashboard Flight System, 900 MHz, 1 Watt (US FCC Approved, up to 14 Miles range with included RPSMA and MMCX rubber antennas) includes Pro Recorder below. (SEA-PRO-1WATT)
$1399.99
Dashboard SMA Antenna Upgrade - We install an SMA Jack and supply a Rubber Antenna of the correct frequency, which replaces the standard thin-wire Antenn on the Dashboard. Required for our Yagi antenna in the Accessories section below. Click here for photo. (SMA-UPG)
$59.99
Memory Upgrade - Doubles the Pro Flight System/Pro Recorder onboard logging memory. (UPG-MEM-PRO)
$99.99
Flight Data Recorder Pro (Included with Seagull Pro above) (FDR-PRO-KIT)
$299.99
Seagull Transmitter, 900 MHz 200mW - if you want to add wireless telemetry to multiple planes not flying at the same time, only one dashboard is needed. Purchase the Pro Flight System for the first plane, and purchase the Pro Recorder above and the transmitter for the remaining planes. (email us for other transmitter options) (SEA-TX-900)
$119.99
Pro Wireless Upgrade (Dashboard and TX) for Pro Recorder owners wishing to add Wireless (FCC 900 MHz version, 200mW) (SEA-UPG-900) Email us for other types of Wireless upgrades.
$199.99
Second 900MHz/200mW Dashboard - Extra LCD Dashboard, for receiving the data from two separate points, or for replacement. (FCC 900 MHz version, 200mW - email us for other types of Dashboards) (DASH-900)
$119.99
Seagull Pro Wireless Flight
Dashboard System Features
System includes everything you need to monitor airspeed,
altitude, RPM, one temperature, 4 servo channel movements
and glitches, receiver voltage
All data is logged to permanent memory, which retains the data even when the power is removed
Includes Recorder with features described below– see additional specs there
Full varying tone variometer with Total Energy
compensation
Operates at 900MHz spread spectrum (FCC certified
version)
FCC version has 200 mWatt output power for 1+ miles of range (more with our Yagi antenna on the
receiver).
Optional higher power radios available.
Onboard components weigh only an ounce or two TOTAL (depending
on model and accessories). Competitors' systems weigh
much more.
Small self-contained LCD Telemetry receiver attaches
simply to your radio, or is monitored by your assistant.
Dashboard is a USB peripheral: plug the receiver
into your laptop to get full screen live display, live graphing,
and unlimited recording on your laptop.
On-board components are powered from your receiver
battery – competitors' systems require heavy, cumbersome
batteries to worry about.
65536 unique transmission IDs (programmable) means
collision problems are extremely unlikely at your
site.
Fully programmable audible alerts can be set on
data parameters.
Ultra-light stainless whip antennas.
Full support for English and Metric units
USB Flight Data Recorder Pro
Features
System includes everything to record airspeed,
altitude, RPM, temperature, 4 servo channel movements
and glitches, receiver voltage
With accessories available below, monitor amps,
pack volts, g-force, EGT, and more.
Logged channels: 16
Full support for English and Metric units
Airspeed measurement from approximately 4 to 290 MPH, with separate
pitot and static input ports (high resolution)
Altitude to 25K+ feet, with 1 foot resolution
Onboard memory increased to 16X our original recorder,
with lossless data compression, for hours of record
time.
USB Live Mode for real time bench monitoring
USB Plug and Play - No new drivers needed
Fully Compatible with Windows Vista, 98SE, ME, Win2K and XP™
Lightweight - approx 1.5 ounces with unit and cables
Simple and quick installation and removal
Retains flight data without battery
Windows flight playback and graphing in real time
Excel™ compatible data output
Ultra-low power consumption - around 35 mA
Built-in status LED indicates battery level on
power-up
Adjustable logging rate, up to 40 Hz.
Powerful built-in graphing
Expansion port for future enhancements
Seagull Pro System
Pro Recorder with Transmitter
Laptop Live presentation
Graphing of Data
GPS 3D Graphing
Dashboard with GPS
NEW: Google Earth!! (shown with Eagle Tree equipped rocket )
Note: Click here for info on using more than one of the same Expander!
NEW: 5Hz GPS Expander Module (GPS-5HZ) New Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed,
GPS altitude, distance to pilot, course, UTC timestamp, and
more. Integrated display/3D graphing software
included in data system. WAAS and EGNOS compatible, 5Hz update rate, built-in patch antenna. Click
Here to view Instruction Manual
5Hz GPS: $149.99
NEW:Video OSD Expander (ETS-OSD)
Fly or race with video? The Eagle Tree OSD Expander provides easy to display real time data over your existing video link. Click here for details.
(Preorder - add to Cart to determine availability date)
Price: 44.99
NEW: Brushless Motor RPM Sensor Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation.
Price: $14.99
External Active Antenna for GPS Expander Module (GPS-ANT) This tiny external antenna is great if you need to mount your GPS Expander under carbon fiber, or in other "RF challenging" locations. The Expander will pick between the strongest of the two signals (from the built-in antenna or this External Antenna) which can improve reception if your model is upside down, etc. Includes cable with MMCX jack. NOTE: if you have our older GPS module (not GPS-5HZ) please check to make sure it has the gold MMCX connector protruding from the red heatrhrink.
Price: $24.99
NEW:Spektrum/JR(TM) Interface Cable (CAB-SPEK) Now use your Seagull Pro to see and set audible alarms on Spektrum or JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your Wireless Dashboard display, and log the data for later review!
Connects between your RX's Flight Log" data port and the Pro Recorder's GPS port. Use a servo Y cable to use your FlightLog display simultaneously! NOTE: make sure your RX has the data port before ordering. Click
Here to view Instruction Manual
Click here for info on using more than one G-Force Expander at the same time.
Price: $79.99
NEW: Servo Current Logger(SERVO-CURR-LOG)
Find out how much current one or more of your servos or other low current devices are drawing. Plugs into your Recorder and servo (or receiver battery/BEC) to log current from 0-5 Amps continuous, with 0.01 Amp resolution.
Price: $24.99
High Voltage Measurement Option - 70 Volts (HIGH-VOLT-OPT) This option increases your recorder measurement cabability to 70V, when used with one of our Electric Expanders below.
When this option is selected with your Recorder or Seagull order, we will modify the Recorder for this option. Or, if you have already purchased your Recorder/Seagull, the Recorder must be returned to us to have this option implemented.
Price: $69.99
Electric Expander - 100 Amp (ELEC-EXP-100) Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Voltage: 0 to 50V
Pack Current: 0 to 100 Amps, in approx 50 mA increments Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price: $39.99
Electric Expander - 140 Amp (ELEC-EXP-140) Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Voltage: 0 to 50V
Pack Current: 0 to 140 Amps, in approx 70mA increments Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price: $59.99
Electric Expander - 300 Amp (ELEC-EXP-300) Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Current: 0 to 300 Amps, in approx 150 mA increments
Pack Voltage: 0 to 50V Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price $129.99
Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander adds two channels of high resolution Analog to Digital to the System,
with up to 15 bit resolution.
Click here for info on using more than one Dual A/D Expander at the same time.
Price: $99.99
NEW: High Gain 900 MHz Yagi Antenna for Dashboard(YAGI-9DBI)
Wireless link range can be doubled, tripled or more with our 9dBi directional Yagi antenna. Includes 18" coax cable with SMA connector. Antenna is 19.6" (0.5m) long, and weighs 1.5 lbs (0.7kg) with removable mounting bracket.
NOTE: requires "SMA Connector" option on dashboard - order above.
Price: $129.99
Thermocouple Expander with Exhaust Gas Probe (THERM-EXP-EGT)
Thermocouple Expander supports two type K thermocouple probes. Includes
EGT thermocouple probe with compression fitting, for measuring up to 2000 degrees F. Click
to view Instruction Manual (PDF)
Click here for info on using more than one Thermocouple Expander at the same time.
Price: $89.99
Thermocouple Expander with CHT Probe Kit (THERM-EXP-CHT) Thermocouple Expander supports two two type K thermocouple probes. Includes CHT probe kit for
use with OS #8 and 10mm plugs. Click
to view Instruction Manual (PDF)
Click here for info on using more than one Thermocouple Expander at the same time.
Price $89.99
Exhaust Gas Temperature Thermocouple Probe Kit (TEMP-EGT) Requires our Thermocouple Expander Board above. Up to two Thermocouple probes can be plugged into the Expander simultaneously.
Price $29.99
Cylinder Head Temperature Thermocouple Probe Kit (TEMP-RINGS) CHT probe kit for use with OS #8 and 10mm plugs.
Requires our Thermocouple Expander Board above. Up to two Thermocouple probes can be plugged into the Expander simultaneously.
Price $29.99
Extra set of 4 Custom Y cables (CAB-Y)
Monitor Servos on additional Platforms
Price: $29.99
RPM Sensor with Four magnets(RPM-KIT-MAG)
Price: $9.99
Extra Cylinder Head Temperature Sensor (TEMP-LOOP)
Micro Temp Sensor (TEMP-MICRO) Perfect for measuring temps of batteries and ESC’s.250
degrees F max temp.
Price: $9.99
Jet ECU Interface - FADEC(ECU-FADEC)
Retrieves ECU data from
the Gaspar FADEC series of ECUs (Merlin, Wren, Artes, etc.). Cable is about 12" long - use our "Expander Extension Cable" below for additional length. Click here for instruction
manual
Price: $24.99
Jet ECU Interface – AMT Netherlands(ECU-AMT-NETH)
Retrieves ECU
data from AMT Netherlands series of ECUs (Mercury, Pegasus and Olympus
Turbines). Cable is about 20" long. Use a Futaba style servo extension for additional length. Click here for instruction manual
Price: $49.99
Jet ECU Interface – JetCat (ECU-JETCAT) Retrieves ECU data from JetCat ECUs (version 4.0g or above). Cable is about 12" long - use our "Expander Extension Cable" below for additional length.
Click here
for instruction manual.
NOTE: USA Customers should
purchase the JetCat interface from BVM, our exclusive US
JetCat dealer.
Price: $24.99
NEW:RCA to Servo Connector Adapter Cable for OSD Expander
Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA.
Preorder - ships approximately 15-July
Price: $9.99
Battery Backup Harness (CAB-BAT-BACK)
Lets you power your system from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.4 v. Click here for instruction manual
Price $4.99
RPM or Temperature Extension Cable (CAB-RPM-EXT)
12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors